ST 10

Automatic slice separation - ST 10

    ST 10

    ST 10 automatic slice separation machine, 10 tracks

    ST 10, offen

    ST 10 automatic slice separation machine, open


    Buffer and feed section

    Kombination SL 30 + ST 10

    The automatic ST 10 slice separation machine is ideally suited for linking with the Selectra slicing machines.

    ST 10
    ST 10, offen
    Kombination SL 30 + ST 10
    ST 10 - SL 30 XL Hartmann
    Standard specification
    Infeed equipped with chain conveyor with pusher bars, base plate made from structured stainless steel. (Upgrade and extention of a slicer outfeed)
    Welded machine frame, stainless steel, standard
    Panels, doors and electrical cabinet or switchbox made from stainless steel
    Hasp locking for cover panels
    Protection hoods made of polycarbonate
    Footrests without dowel holes
    Drive with frequency converter
    Product infeed with lateral guides, manually adjustable
    Driven crosswise rake device, 10-lanes, take over from infeed
    Transport and buffer section for upright standing slices, pusher dogs, base plate made from structured stainless steel
    Driven rake pusher devices, above buffer lines
    10-lane slice separation and turning system , vertical paddle-wheel, turning by 90°
    O-Belt conveyor for product stack outfeed
    Signal lamp - red light / green light
    Switch cabinet with hasp locking
    Switch cabinet located on top of the machine frame
    Switch cabinet with fan+filter system - standard-
    Frequency converter Hitachi
    Servocontroller Omron
    Electric execution according to CE-specification
    Operating language and labels in German language
    Operating manual in German language
    Spare parts catalogue in German language
    Protection hoods made of perforated stainless steel panels
    Additional signal lamp
    Switch cabinet with air-conditioning
    Frequency converter SEW
    Frequency converter Allen Bradley
    Voltage modulation, 3-phase
    Electric execution according to UL-specification
    Customer-specific special machine modifications
    Customer-specific operating language and labels
    Customer-specific operation manually

    Can the machine be cleaned wet?

    The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

    Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

    Change kits allow cleaning and preparation in addition to the production operation.

    How loud is a machine by GHD Hartmann?

    The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

    Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

    The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

    As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

    Which controls can GHD Hartmann Maschinenbau offer?

    In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

    Siemens or Allen Bradley are available as options.

    What compressed air quality is recommended for machine use in the food industry?

    According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.


    ST 10

    Fully automatic system for rotating and separating or grouping sliced bread in front of a flowpack tubular bag machine or another packaging machine for packaging individual slices or stacks of bread.

    The device is placed behind a bread slicing machine and takes the sliced bread into a buffer section using a raking system, which continuously feeds it into the separating and rotation device.

    Generously dimensioned doors provide good access for cleaning and maintenance.

    Technical specifications
    Dimensions: Length: approx. 3500 mm, Width: approx. 2500 mm, Height: approx. 2600mm
    Product dimensions: Length: 100 - 350 mm, Height: 50 - 160 mm
    Capacity: max. 900 slices/min. Per lane of seperation 90 single slices of bread, 75 double slices of bread or 50 tripple slices of bread per min.
    Speed: adjustable
    Controller: Omron
    Operating panel: Touch panel /Touch panel of the slicer
    Control voltage: 24 V, DC
    Frequency controller: Hitachi
    Pneumatic system: Festo
    Power supply: 400 Volts , 50 cycles
    Power consuption: approx. 2 kW
    Compressed air: min. 6,0 bar (ISO 8573-1)
    Operating side: left / right
    Protection class: IP 54
    Adjustment: manual