Autoload system with rake - AL IQ

    AL IQ

    Autoload loader for crossfeed AL IQ.

    ALIQ Hartmann
    Standard specification
    Welded machine frame, stainless steel, overall width transport system 840 mm
    Panels, doors and electrical cabinet or switchbox made from stainless steel
    Hasp locking for cover panels
    Protection hoods made of polycarbonate
    Footrests without dowel holes
    Drive by master shaft from following HARTMANN-machine
    Plastic modular belt for line divider infeed
    Stainless steel lateral guides above product infeed, manually adjustable
    Plastic modular belt, feeding upper layer (1st compartment)
    Stainless steel lateral guides above transport line, manually adjustable
    Driven crosswise rake device, 1-lane, installed above the transport system
    Switch cabinet with hasp locking
    Switch cabinet with fan+filter system - standard-
    Operating elements located in the machine panel or door of the switch box
    Control unit integrated in the bagging machine
    Electric execution according to CE-specification
    Operating language and labels in German language
    Operating manual in German language
    Spare parts catalogue in German language
    Voltage modulation, 3-phase
    Electric execution according to UL-specification
    Customer-specific special machine modifications
    Customer-specific operating language and labels
    Customer-specific operation manually
    Remote video URL

    Can the machine be cleaned wet?

    The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

    Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

    Change kits allow cleaning and preparation in addition to the production operation.

    Are brochures in other languages available?

    Further brochures in other languages ​​are available here. The technical state may not be updated!

    How loud is a machine by GHD Hartmann?

    The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

    Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

    The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

    As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

    Which controls can GHD Hartmann Maschinenbau offer?

    In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

    Siemens or Allen Bradley are available as options.

    What compressed air quality is recommended for machine use in the food industry?

    According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

    Sesam Burger

    AL IQ

    Device for automatic feeding and stacking of grouped products such as baguettes, hot dog or hamburger buns into a packaging machine. The products are fed into the machine in two groups.

    Depending on the design, the first pre-grouped product layer is either fed directly in line straight into the packaging machine's transport chain, or pushed laterally into the packaging machine's transport chain with a cross pusher.

    The second group of products is conveyed to an elevated station. Here, the products are pushed on top the first group of products that are already in the packaging machine's transport chain with another cross pusher.

    Technical specifications
    Dimensions: Length: approx. 3000 mm, Width: approx. 1500 mm, Working height approx. 1050mm
    Product dimensions: Diameterr: min. 4 inch (92 mm), max. 5 inch (130 mm), Height min. 20 mm, max. ca. 35 mm
    Capacity: approx. 40-65 product layers/min per infeed position, depending on products
    Speed: adjustable, depending on the packaging machine
    Controller: Omron
    Operating panel: Touch panel /Touch panel of the packaging machine
    Control voltage: 24 V, DC
    Frequency controller: Hitachi
    Pneumatic system: Festo
    Power supply: 230/400 Volts / 50 cycles
    Power consuption: approx. 1 kW
    Compressed air: min. 6,0 bar (ISO 8573-1)
    Operating side: left / right
    Protection class: IP 54