EC 102 B

Sealing unit EC 102 B

Absaugung Sammelbehälter

Device for suction extraction of the film sections.


Crosswise sealed bag


Crosswise sealed bag, cut off film overhang

EC 102 B
Absaugung Sammelbehälter
Standard specification

Welded machine frame, lacquered in stainless steel design colour, standard slope 20°
Panels, doors and electrical cabinet or switchbox made from stainless steel
Cover panels with hasp locking
Switch cabinet located on top of the machine frame
Protection hoods made of polycarbonate
Footrests without dowel holes
Drive with frequency converter
Infeed by transport belt and roller conveyor for slopes 20°or 30°
Lateral guides above transfer line, manual adjustable
Lateral guides above transfer line, manual adjustable by handwheel
Brushing rollers for smoothing the bag before closing
Sealing aggregate, pulsed heating of sealing wires - PE-foils
Cutting off the foil overhang after sealing
Suction device for cut off foil residues
Outfeed with slide
Signal lamp - red / green
Switch cabinet with hasp locking
Switch cabinet with fan+filter system - standard-
Operating elements located in the machine panel or door of the switch box
Omron controls + switches
Frequency converter Hitachi
Electric execution according to CE-specification
Operating language and labels in German language
Operating manual in German language
Documentation in German language

Welded machine frame, lacquered in stainless steel design colour, standard slope 30°
Welded machine frame, lacquered in stainless steel design colour, special slope 45°
Welded machine frame, lacquered in stainless steel design colour, special slope 60°
Welded machine frame, stainless steel, standard slope 20°
Welded machine frame, stainless steel, standard slope 30°
Welded machine frame, stainless steel, special slope 45°
Welded machine frame, stainless steel, special slope 60°
Protection hoods made of perforated stainless steel panels
Sealing aggregate, permanent heated sealing plates, non-stick coated - PP-foils
Additional signal lamp
Switch cabinet with air-conditioning
Frequency converter SEW inside the switch cabinet
Frequency converter Allen Bradley
Voltage modulation, 3-phase
UL- certificate / UL-c certificate and labeling before delivery at GHD Hartmann
Electric execution according to UL-specification
Customer-specific special machine modifications
Customer-specific operating language and labels
Customer-specific operation manual
EC102 B

Can the machine be cleaned wet?

The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

Change kits allow cleaning and preparation in addition to the production operation.

Are brochures in other languages available?

Further brochures in other languages ​​are available here. The technical state may not be updated!

How can I determine the size of bags?

Bag sizes depend on the products and the orientation of the products in the bag.

In any case, the product tolerances must be considered. This is especially important when several products are packed side by side, one after the other or one above the other in a single package. A beautiful packaging fits as closely as possible to the product and supports the product. The sizes recommended by GHD Hartmann can be looked up in an Excel spreadsheet.

How loud is a machine by GHD Hartmann?

The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

Which controls can GHD Hartmann Maschinenbau offer?

In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

Siemens or Allen Bradley are available as options.

What compressed air quality is recommended for machine use in the food industry?

According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

Siegel 1
Siegel 2

EC 102 B

This sealing device is placed in an automatic packaging line behind a packaging machine in order to enable sealing of the bag ruffles without any restriction of the cycle capacity.The device consists of a feeder, a conveyor belt and a sealing station arranged at right angles. The conveyor belt is designed with an angle of inclination.

The filled bags are automatically transported to the sealing station. Brushes align the filled bag for optimum sealing results. A slicing device removes excess foil, which is removed by suction. All drive elements are directly accessible simply by opening the machine doors.

Technical specifications

Dimensions: Length: approx. 1800 mm, Width: approx. 1200 mm, Height: approx. 1800 mm, Working height: approx. 950 mm
Weight: 600 kg
Product dimensions: Length: up to 400 mm, Width: up to 220 mm, Height: up to 120 mm
Capacity: 3000 - 3600 package/ h
Speed: adjustable
Controller: Omron
Operating panel: Switches and buttons
24 V, DC
Frequency controller: Hitachi
Pneumatic system: Festo
Power input: approx. 2 kW
Compressed air: min. 6,0 bar (ISO 8573-1)
Pre-manufactured plastic bags (PE, else on demand)
Operating side: left / right
Protection class: IP 54
Adjustment: manual