STV 30

Stacking machine - STV 30

    Pictures
    STV 30

    STV30 stacking machine for mostly small individual products.

    STV 30 offen

    STV30 stacking machine, open.

    STV 30 mit Band

    The horizontal belt cutter HB in combination with the STV 30 forms an ideal combination.

    STV 30 Zugang

    Good overview and accessibility for product change and cleaning.

    STV 30 Kanäle

    Separate inlet channels for continuous stacking.

    STV 30 Stapelvorgang

    The STV 30 stacking machine combines all functions for a continuous stacking process.

    STV 30 Stapel

    Controlled stack transfer to the subsequent packaging system.

    STV 30
    STV 30 offen
    STV 30 mit Band
    STV 30 Zugang
    STV 30 Kanäle
    STV 30 Stapelvorgang
    STV 30 Stapel
    STV30 Hartmann
    STV 30 Zeichnung
    STV30 Hartmann
    STV 30 Zeichnung
    Standard specification
    
    Welded machine frame, stainless steel, overall width transport system 990 mm
    Panels, doors and electrical cabinet or switchbox made from stainless steel
    Hasp locking for cover panels
    Protection hoods made of polycarbonate
    Security light barrier for intervention protection
    Footrests without dowel holes
    Conveyor system with adjustable speed
    Plastic modular belt for product feeding
    Belt conveyor for product acceleration
    Lateral guides above transport conveyor, manually adjustable 6-lanes
    Stopping units for products at the infeed, driven, 6-lanes
    Product stacker with driven deflector - 6 units
    Outfeed with plastic modular belt conveyor, closed smooth surface, driven
    Product outfeed with lateral guides, manually adjustable
    Driven lengthwise rake device, 1-lane, installed above the transport system
    Signal lamp - red / green
    Switch cabinet with hasp locking
    Switch cabinet with fan+filter system - standard-
    Contactor control system with switches
    Omron controls + touchpanel in the bagging machine
    Operating panel for manually input with Emergency -stop push-button
    Frequency converter Hitachi
    Electric execution according to CE-specification
    Operating language and labels in German language
    Operating manual in German language
    Spare parts catalogue in German language
    Options
    
    Protection hoods made of perforated stainless steel panels
    Modular belt for product acceleration
    Lateral guides above transport conveyor, manually adjustable 2-lanes
    Lateral guides above transport conveyor, manually adjustable 10-lanes
    Stopping units for products at the infeed, driven, 2-lanes
    Stopping units for products at the infeed, driven, 10-lanes
    Additional signal lamp
    Switch cabinet with air-conditioning
    Frequency converter Allen Bradley
    Voltage modulation, 3-phase
    Electric execution according to UL-specification
    Customer-specific special machine modifications
    Customer-specific operating language and labels
    Customer-specific operation manually
    Remote video URL
    Remote video URL

    Can the machine be cleaned wet?

    The machines are designed according to protection class IP54. Wet cleaning of the machines inside the cutting and packaging room is not recommended as moisture and bread crumbs directly cause the formation of mold spores.

    Wet cleaning should therefore only take place outside the cutting and packaging room: components of the machine, such as guide plates, can be dismantled and cleaned at an external washing area. After drying and disinfection, the hygienically flawless dry components can be inserted into the device and reused.

    Change kits allow cleaning and preparation in addition to the production operation.

    Are brochures in other languages available?

    Further brochures in other languages ​​are available here. The technical state may not be updated!

    How loud is a machine by GHD Hartmann?

    The noise emission initially depends on the type of machine. Packaging machines, cutters or systems for grouping are fundamentally different due to the different functions.

    Another factor is the nature of the products, which can behave differently during processing and transportation. A machine may be very quiet at idle, but produces varying amounts of noise during processing, depending on the products.

    The type of cover also has a great influence on the noise emission: Polycarbonate viewing covers significantly reduce the noise level, while perforated grids can not significantly reduce noise emissions.

    As a rule, the maximum noise emission of the machines is not more than 78 dB (A).

    Which controls can GHD Hartmann Maschinenbau offer?

    In addition to contactor controls for simple devices, GHD Hartmann Maschinenbau offers systems from the manufacturer Omron as a standard controller for more complex tasks.

    Siemens or Allen Bradley are available as options.

    What compressed air quality is recommended for machine use in the food industry?

    According to ISO 8573-1 with reference to VDMA standard sheet 15390-2, we specify a compressed air quality that we recommend when using the machines and devices.

    Cracker
    Cracker eckig
    Cracker rund

    STV 30

    Fully automatic machine for forming product stacks, which can be specifically configured according to performance requirements, product type and product format. The mostly small individual products are continuously fed in tracks and stacked in the running direction. Once the stacks have been formed, they are released for passing on to a subsequent packaging machine.

    The clear and easily accessible design enables easy adjustment, cleaning and monitoring.

    Technical specifications
    
    Dimensions: Length: approx. 3000 mm, Width: approx. 1300 - 2000 mm, Height: approx. 2400mm
    Product dimensions: Length: 70 - 120 mm, Width: 70 - 120 mm, Height: 15 - 30 mm
    Capacity: per stacking lane 80 products/min or 20 stacks with 4 products each/min
    Speed: adjustable
    Controller: Omron
    Operating panel: Touch panel /Touch panel of another machine
    Control voltage: 24 V, DC
    Frequency controller: Hitachi
    Pneumatic system: Festo
    Power supply: 230 / 400 Volts , 50 cycles
    Power consuption: approx. 2 kW
    Compressed air: min. 6,0 bar (ISO 8573-1)
    Operating side: left / right
    Protection class: IP 54
    Adjustment: manual